TPH Modular Rack System (M.R.S.) – The Future of Hunting Racks

THIS IS THE RACK ONLY

Modular. Versatile. Built for the Field.

The TPH Modular Rack System (M.R.S.) is the next evolution in hunting racks—engineered for durability, adjustability, and ease of use. Based on the proven foundation of our Gen 1 system, this updated version improves on every core feature: simplicity, strength, and modularity. Whether you're mounting it in a side-by-side (SxS) or pickup bed, the M.R.S. is designed to meet the demands of serious hunters.

---

How the System Works

The best way to think about the M.R.S. is as a two-part system:

• The Base — adjustable in width to fit your vehicle

• The Platform — adaptable in layout based on how you install the chair plates

Each M.R.S. kit includes the same adjustable base and frame structure. The difference lies in how the platform is set up, which determines width, chair spacing, and potential add-ons. While the rack is available in three purchase configurations, the platform itself can be set up in four functional layouts.

---

Base System Adjustability

The base serves as the structural foundation of the system and is fully adjustable in width to match the bed of most side-by-sides or trucks. This adjustability is independent of how the platform is configured.

• Adjustable from approximately 52 ¾" to 63 ⅝"

• 29 1/4" is needed for bed length. The portion of the base sytem that sits on your bed is 29 1/4" long

• Compatible with nearly all SxS and pickup models

• L-brackets with pre-drilled holes offer the option for permanent installation

• Pre-installed rubber strips reduce vibration and prevent damage to bed rails

• Suitable for both temporary and permanent setups

Installation Tip:
Measure the inside width of your truck bed or SxS. Subtract the rubber strip thickness. Pre-set the rack width, lightly snug the bolts, push the rack into place, and then tighten all eight leg bolts. Bed clamps or straps can be added for additional security if not permanently mounted.

---

Platform Configuration Options

No Middle Plate Kit

• Includes: Adjustable base, full frame, and two large chair plates

• Can be configured from approximately 58" to 67.5" wide, depending on mounting location

• Offers full functionality with just the two plates — the entire top platform is included

• Ideal for users who want flexibility and may choose to add a center plate later

Small Middle Plate Kit

• Includes: All components of the No Middle Plate Kit plus one small center plate

• Designed to create a solid, continuous surface when the rack is set at approximately 58" wide

• The small plate fills the gap between the large plates and does not extend beyond vehicle sides

• Best for tighter spacing between chairs and a clean, finished platform layout

Medium Middle Plate Kit

• Includes: All components of the Small Kit plus one medium center plate

• Sets the platform width at approximately 67.5" wide

• The medium plate fills the center and includes an additional chair mounting position

• Allows chairs to be spaced further apart or used to mount a solo center chair

Note:
All center plates (small and medium) are available separately in the parts section if you wish to expand your system later.

---

Key Features

• Modular platform supports four functional configurations

• Universal base fit for nearly all trucks and side-by-sides

• Durable steel construction, built in Texas

• Total weight under 200 lbs with the largest center plate installed

• Ships in three compact boxes for lower cost and easy transport

• Initial assembly takes roughly one hour; faster after initial setup

• Adaptable for both permanent and temporary installation

• Full accessory line coming soon, including mounting gear and expansion kits

Installation Tips

To get the best fit and most secure setup:

1. Measure the inside width of your truck bed or SxS from rail to rail.

2. Subtract the thickness of the pre-installed rubber strips from your measurement.

3. Pre-set the base width of the rack accordingly before placing it in the vehicle.

4. Lightly snug all bolts to hold the width in place.

5. Push the rack firmly against the bed rails for a tight fit.

6. Once positioned, fully tighten all eight leg bolts for stability.

7. If you aren’t permanently mounting the rack, we recommend using bed clamps or ratchet straps to further secure it.

---

Pickup & Shipping Info

• More pictures coming soon

• In-store pickup available at Ally Outdoors in Midland, TX

• Please include your phone number during checkout

• Allow up to 5 business days for processing

• Select “In-Store Pickup” at checkout and leave a note — we’ll contact you when your order is ready

Pickup Location:
Ally Outdoors
201 Spring Park Drive
Midland, TX 79705
(Note: Pickup must occur during store hours)

---

Legal Disclaimer

By purchasing and using TPH Chairs, Racks, and Baskets, you acknowledge and agree to the following terms:

Assumption of Risk:
Use of hunting racks and accessories involves inherent risks including personal injury, property damage, or death. It is your responsibility to operate, install, and use the system safely and in accordance with local laws and regulations.

Installation Responsibility:
Improper installation or use of the rack may result in failure or instability. Installation should be performed by a qualified person or professional welder, especially if permanent attachment is required.

Limitation of Liability:
TPH and its affiliates are not liable for injuries, damages, or losses resulting from improper use, modification, or installation of our products.

Indemnification:
By purchasing, you agree to indemnify and hold harmless TPH and its affiliates from any legal claims, expenses, or liabilities associated with your use of these products.

Customer Responsibility:
It is the buyer’s responsibility to ensure proper mounting, support, and load handling. Certain vehicle beds—such as GM pickup beds—may lack structural support near the bed rails. In these cases, we strongly recommend placing 2x4 wood blocks beneath the rack feet to distribute weight and avoid damage or collapse.

---

TPH Predator Hunting Chairs – The Ultimate Upgrade for Every Hunter

THIS IS ONLY THE CHAIRS, ANY BOAT SEAT IS NOT INCLUDED. 

M.C.S. – MODULAR CHAIR SYSTEM

At TPH, we’ve always been at the forefront of innovation in hunting chairs and rack development. From our first chair to our precision-engineered shooting stems, we’ve consistently led the way. Now, we’re excited to introduce the M.C.S., taking an already industry-leading design to the next level.

The Only Predator Hunting Chair You’ll Ever Need

The TPH Chair has always been the only high-quality, shippable predator hunting chair on the market. The M.C.S.builds upon that legacy, enhancing stability, durability, and overall functionality. Whether you spend hours in the field or need a reliable setup for any environment, the M.C.S. delivers superior performance.

Next-Level Design and Versatility

The M.C.S. now features the same base structure across all three models—Economy, Muffin Top, and Biz Class—allowing you to mix and match bases and tops for a customizable, efficient setup. The pass-through feature enables easy chair mounting, giving you greater flexibility while maintaining a consistent base system across your gear.

This means easier upgrades, multiple setup possibilities, and a cost-effective solution for hunters who need variety without breaking the bank.

Premium Build for Premium Performance

While staying true to our original concept, every aspect of the M.C.S. has been upgraded. Higher specifications and precision manufacturing ensure a better fit, improved stability, and long-term durability. Each M.C.S. is powder-coatedfrom the factory with a textured black finish, ensuring a rugged, weather-resistant surface built to withstand the toughest conditions.

Easy Setup and Customization

What’s Included:

• 1 Weld Plate for secure mounting
• The M.C.S. Chair itself
• All necessary bolts and hardware for easy assembly
• Top of your choosing (Solo, Muffin Top, or Biz Class)
• 1 Vortex Radian Ball Head
• Stems included:
  • 1 with the Solo model
  • 3 with the Muffin Top and Biz Class models
  • MADE IN TEXAS ARM PADS

Our chairs are compatible with most boat seats, but we are currently developing our own custom SOS (BOAT) seat, specifically designed for the M.C.S. for optimal fit and comfort.

Looking to customize your setup? We offer additional add-ons in our Parts Listing, including extra stems, bolts, alternate tabletops, cup holders, and armrest pads to enhance your hunting experience!

Customizable Tops for Every Setup

Choose your chair system and select your preferred tabletop from our range of options. Each chair can be upgraded with different tabletops, making it easy to tailor your gear to your specific needs.

• Solo Top (Economy) – Ideal for thermal hunters, featuring a single stem for mounting your rifle. Great for those still using gun lights. While we recommend upgrading to a Muffin Top or Biz Class Top for running lights, the Solo Top remains a solid budget-friendly choice.
• Muffin Top – Retains the ambidextrous armrest of the Solo Top but allows for mounting up to three stems for lights and accessories.
• Biz Class Top – The ultimate choice for stability, combining the armrest with the ability to mount three stems.

Stable, Modular, and 360° Swivel – Perfect for Any Hunter

The TPH M.C.S. isn’t just a predator hunting chair—it’s a modular, 360-degree swivel chair designed for ultimate stability and flexibility. Whether hunting from a rack or stationary setup, the M.C.S. offers easy locking and pinning functionality.

• Secure bolt-down capability for rack setups
• Quick-lock pin system for fast and easy adjustments
• Locking mechanism ensures stability during active use

Built for Every Type of Hunt – Day or Night

This chair isn’t just for predator hunting! The M.C.S. is versatile enough to be used in a wide range of hunting scenarios:

• Safari hunts
• Deer and hog hunts
• Prairie dog shooting
• Benchrest-style shooting

Wherever your hunting adventures take you, the M.C.S. offers the stability and comfort needed to perform at your best.

Future-Proof Your Hunting Setup

The M.C.S. is just the beginning of a full ecosystem of Texas-made hunting products. We will continue to release TPH Chair accessories, racks, and custom solutions for hunters everywhere.

If you plan to integrate the TPH Chair into your own rack system, use the weld plate provided and ensure proper installation by a reputable welder. TPH, Ally Munitions, and subsidiaries are not responsible for injuries due to improper installation. By purchasing this product, you accept full liability.

Looking for a Complete Setup? Check Out Our Gen 2 Rack System!

No rack? No problem! The M.R.S. (MODULAR RACK SYSTEM) is the only shippable, fully adjustable rack on the market, designed to work seamlessly with TPH Chairs for a complete, customizable hunting solution.

Need a basket for hauling game? The M.B.S. (MODULAR BASKET SYSTEM) is available now—perfect for tossing in critters and transporting them with ease.

---

Legal Disclaimer

By purchasing, using, or installing TPH Chairs, Racks, and Baskets (the "Products"), you acknowledge and agree to the following terms and conditions:

Assumption of Risk

You understand that using these products involves inherent risks, including but not limited to injury, property damage, or death. It is your responsibility to use them safely and ensure compliance with all applicable laws and regulations.

Installation and Use

If installing TPH products into a custom setup, including racks or hunting platforms, you are solely responsible for ensuring proper installation. All mounting should be done by a qualified professional or welder. Improper installation may result in malfunction, injury, or death.

Limitation of Liability

TPH, Ally Munitions, and their affiliates, officers, employees, or agents are not responsible for any injury, damage, loss, or claim arising from improper use, installation, or failure to follow safety precautions.

Indemnification

By purchasing and using these products, you agree to indemnify and hold harmless the company, its affiliates, and representatives from any and all claims, damages, or liabilities related to use, installation, or misuse of the products.

Acceptance of Terms

By purchasing the products, you confirm that you have read, understood, and accepted these terms and acknowledge full responsibility for their use.Due to manufacturing and coating processes, some holes may occasionally need to be cleaned out with a step bit. We continuously make small adjustments over time and strive to pre-fit every component before it ships. However, if something does not align perfectly, a few seconds with a drill and step bit should resolve the issue.

---

In-Store Pickup Available!

 

• In-store pickup available! Ensure your phone number is included at checkout.
• Please allow up to 5 days for processing.
• Leave us a note at checkout for in-store pickup, and we’ll reach out!

? Location:
Ally Outdoors
201 Spring Park Drive
Midland, TX 79705
(Store hours apply)

---

Don’t Forget!

If you need extra bolts, alternate tabletops, cup holders, armrest pads, or other accessories, check out the Parts & Accessories listing

Outfitters & Bulk Orders

Outfitters and other potential customers looking to purchase larger quantities of our products—please reach out for bulk pricing options!

TPH MODULAR BASKET SYSTEM (M.B.S.) – Rugged, Texas-Built Hauling Solution

The TPH Modular Basket System is the go-to gear hauler for hunters, outfitters, and anyone needing a high-capacity carrier that won’t weigh them down. Proudly made in Texas, this American-built basket has been thoroughly tested across harsh environments—from frozen rivers in the Panhandle to desert hunts in West Texas. Whether you’re stacking coyotes, hauling whitetail, or running coolers deep into the backcountry, the M.B.S. is built to take it all.

---

Key Features

• Weight: ~50 lbs

• Carrying Capacity: 700+ lbs (load responsibly)

• Construction: Welded steel, professionally powder coated (matte black, textured finish)

• Dimensions:

  • Width: 55" at widest point, tapers to 44"

  • Depth (front to back): 15"

  • Height: 6" (low profile design prevents tail light obstruction on most vehicles)

• Receiver Compatibility: Modular mount system fits both 2" and 2.5" hitch receivers

• Drainage/MOLLE Panel: Slotted base allows water runoff and future accessory mounting

• Hand Holes & Strap Mounts: For easy pin installation and ratchet strap integration (sold separately)

---

Why We Recommend It

The TPH M.B.S. isn’t just a basket—it’s a workhorse. Designed for real-world use, this system has been tested with everything from single deer to over 25 coyotes strapped down (don’t ask how—it wasn’t pretty). It's optimized for:

• Game hauling

• Gear transport

• Cooler carry (fits most 15" deep coolers)

• Brush deflection and tight terrain navigation

With its compact vertical profile, the M.B.S. doesn’t hang low like typical racks that get snagged in ditches or trails. It's also SXS and truck friendly, offering a low-profile look with high-end performance. This is not an imported compromise—it’s Texas-built and field-proven.

---

Installation Tips

• Designed to be plug-and-play into your vehicle’s receiver hitch

• Generous hand cutouts make installing pins easy, even with gloves

• Compatible with our bolt-on retractable ratchet straps (sold separately)

• Future accessories—like riser kits for SXS, MOLLE add-ons, and tailgate stops—coming soon

---

What It Fits

This basket is sized to work well with:

• SXS and UTVs

• Standard pickup trucks

• Most full-size SUV hitch mounts

Thanks to its angled frame, it won’t block tail lights or license plates on most vehicles.

---

In-Store Pickup Available

In-store pickup is available at Ally Outdoors. You must include a phone number when ordering. Please allow up to 5 business days for processing. Be sure to leave a note stating "In-store pickup." We will contact you when your order is ready.

Pickup Location:
ALLY OUTDOORS
201 Spring Park Drive
Midland, TX 79705
Store hours apply

---

Shipping & Liability Disclaimer

We ship the Gen 2 TPH M.B.S. anywhere in the U.S. Each unit is professionally packaged and inspected for quality prior to shipping.

Please note:

• We are not liable for damage from misuse, overloading, or extreme abuse.

• The M.B.S. is not to be used as a battering ram, structural support, or towing device.

• If damage occurs from misuse, warranty replacement is not offered.

• Use ratchet straps and proper loading techniques at all times.

---

Outfitter & Bulk Orders

Outfitters or groups looking to purchase multiple baskets? Reach out for bulk pricing and dealer opportunities.